Unscreened Composite THHN/THWN-2 Cable

Applications

These cables are use in class 1, Division 2 Hazardous locations, may be installed in trays, wire ways, ducts, conduit and aerially when properly supported by a messenger. They are approved for direct burial, wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required.

Standards

ICEA S-73-532; ICEA S-95-658; UL 1277; UL 83

Construction

• Conductor: Bare, annealed copper conforming to ASTM B3 and B8
• 4 Control Conductors with 3 Power conductors and 1 Ground Wire
• Insulation: Flame-retardant PVC/Nylon type THHN/THWN-2 per UL 83
• Core identification:
• Control conductors are color coded as E2 per ICEA S-73-532
• Power conductors are black with numbers
• Ground wire are green insulated
• Binder tape
• Ripcord: Nylon
• Jacket: Special PVC, flame retardant, UL listed sunlight and moisture resistant, meeting the requirements of UL 1277. Color: Black
• Chemical resistance: Aliphatic and aromatic hydrocarbon resistance

600V, Rated 90°C